Last update:
23 March 2014 
Listing by contributor | Listing by date reported | Listing by page number
At the bottom of the page, I assert that "Using UNIVERSAL::isa avoids all these problems." In fact, it only solves the first problem, not the second, much-less-likely one.
(KW)The code
sub function {
if (++$calls > 100) { memoize 'function' }
...
should have been
sub function {
if (++$calls == 100) { memoize 'function' }
...
since we don't want to memoize the same function more than once.
(FF)The output produced by the make_partition() functions is not as is shown on page 223; the iterators generated by the code traverse the search space in depth-first order, but the sample output on page 223 is in breadth-first order. To fix this, change
my $item = pop @agenda;
to
my $item = shift @agenda;
in each function. The discussion in the first paragraph on page 223 is confused. It says:
Because we return each partition immediately, after putting its children onto the agenda, old nodes are never preempted by new ones, regardless of whether we use pop or shift.
This is completely wrong. When pop is used, nodes are taken from the end of the agenda; the nodes so taken are the ones most recently added, so they certainly do pre-empt the nodes that were on the agenda before.
(DG)The discussion of the tortoise-and-hare algorithm suggests that it can detect repeating values in a sequence without the memory costs of maintaining a record of the already-seen values. In most contexts, this is true. However, in the context of infinite streams, the tortoise-and-hare algorithm loses this benefit. After n iterations, the tortoise is at the nth stream element and the hare is at the 2nth. Therefore, there are n stream elements held in memory that will not be garbage-collected until the tortoise passes them.
Since the memory cost is proportional to n anyway, the simple, obvious method is probably better:
sub cut_loops {
my ($stream, $seen) = @_;
$seen = {} unless defined $seen;
my $nextval = drop($stream);
return if $seen->{$nextval}++ ;
return node($nextval, promise { cut_loops($stream, $seen) });
}
The tortoise-and-hare algorithm does make sense in the context of the iterators of chapters 4 and 5.
The definition of add2() is wrong. Empty streams in this context represent infinite sequences of zeroes. So add2() should be:
sub add2 {
my ($s, $t) = @_;
return $s unless $t;
return $t unless $s;
node (head($s) + head($t),
promise { add2(tail($s), tail($t)) } );
}
(WL)
The call to walk_html() at the top of the page is wrong. It says
walk_html($tree,
sub { ['maybe', $_[0]] },
promote_if('h1'),
});
in which the braces aren't even balanced. It should have been:
walk_html($tree,
sub { ['maybe', $_[0]] },
promote_if(sub { $_[0] eq 'h1' }),
);
(PB)
Because the INTEGER lexer is called before the IDENTIFIER lexer, it will incorrectly tokenize a string such as a2 = p; the INTEGER lexer will extract the 2 out of the identifier a2, resulting in a syntax error later on.
Probably the best way to fix this is to replace the INTEGER pattern qr/\d+/ with qr/\b\d+\b/.
The same error occurs in the lexers on pages 374, 392, and 424. A related error occurs on page 436.
(WL)The call to star($separator, $element) should be star(concat($separator, $element)). (Or else we should modify star() to implicitly concatenate its arguments, if it has more than one.)
(WL)Using _ as the name of a subroutine is a bad idea. One reason is that the name _ is special, and is always forced into package main::. So for example:
package Parser;
sub _ { die "Ouch" }
package Unrelated;
$dir_readable = -d $dir && -r _ ;
does not do what you expect; you want _ to be interpreted as the name of a filehandle, but it is not. You have defined a subroutine named main::_ here, not Parser::_. Then, in the unrelated package, you think that in -r _ the _ is the name of a filehandle. Usually it is, and it usually names the special filehandle main::_. But now the Perl parser interprets it as a call to the function main::_(), and the statement dies.
Moreover, Wolfgang Laun points out that _ cannot be exported in the normal way, because of its special interaction with namespaces. For example, suppose you try to do:
package F;
use base 'Exporter';
BEGIN { @EXPORT = '_' }
sub _ {
print "_(@_)\n"
}
package main;
F->import();
_(1..3);
Here we are trying to export _ from package F:: to package main::. But there is no _ in package F::; it is already in main::! So you get
Subroutine main::_ redefined at /usr/local/lib/perl5/5.8.0/Exporter.pm line 59. at ...
Undefined subroutine &F::_ called at ...
If you change the code to
package F;
use base 'Exporter';
BEGIN { @EXPORT = '_' }
sub F::_ {
print "_(@_)\n"
}
package main;
F->import();
_(1..3);
then it works as it should, for some value of "should". As far as I know HOP does not contain an instance of this error.
Wolfgang Laun points out other syntactic problems that are not exercised in HOP but that support the general conclusion that my attempt to use the compact notation
_"...";
was a bad idea. The following expressions are syntax errors:
_'arg'
&_'arg'
&_ 'arg'
although
_ 'arg'
is acceptable. This is not actually a problem with _; it occurs because ' is still available as an obsolete synonym for ::. (This causes problems elsewhere; for example $x = "Fred"; print "$x's wallet" does not print "Fred's wallet".) On page 555 I used
$base_name = _"IDENTIFIER";
which does work, but if I had used single quotes, it would have failed. Unlike the two problems described above, changing _ to __ will not fix this, because the problem is really with the ' symbol.
(GY)The Gaussian elimination technique for solving linear equations is notoriously unreliable in conjunction with floating-point numbers, and has a number of dangerous behaviors. I chose to use it anyway because it is a lot easier to understand than any other method I could have presented.
In this application, however, I have encountered at least one serious problem with the algorithm as presented in the book. Under some circumstances, the equation solver will fail to eliminate a variable from an equation when it should have. For example, suppose one equation is
x + 2y + 2z = 9
and another is
2y + 2z = 0
and the program uses the second equation to eliminate y from the first equation; the result should be:
x = 9
But now suppose that because of an earlier floating-point roundoff error, the second equation is instead:
2y + 1.9999999999z = 0
Then after eliminating y from the first equation, one has
x + .0000000001z = 9
If no other equations involve z, the erroneous z term will never be eliminated from this last equation, and the program will incorrectly conclude that it cannot determine the value for x.
For linogram, I think a suitable fix is to change the arithmetic() function on page 504:
sub arithmetic {
my ($a, $ac, $b, $bc) = @_;
my %new;
for my $k (keys(%$a), keys %$b) {
my ($av) = $a->coefficient($k);
my ($bv) = $b->coefficient($k);
$new{$k} = $ac * $av + $bc * $bv;
}
$a->new(%new);
}
We will add a special case that watches out for floating-point dust:
my $EPSILON = 1e-6;
sub arithmetic {
my ($a, $ac, $b, $bc) = @_;
my %new;
for my $k (keys(%$a), keys %$b) {
my ($av) = $a->coefficient($k);
my ($bv) = $b->coefficient($k);
my $new = $ac * $av + $bc * $bv;
$new{$k} = abs($new) < $EPSILON ? 0 : $new;
}
$a->new(%new);
}
If a new coefficient is calculated to be too small, we assume it is due to round-off error, and truncate it to zero. I think this is probably safe, because values in linogram nearly always represent distances in a diagram, and output devices don't have sufficient resolution to render meaningful differences on the order of $EPSILON. This change may, of course, introduce new problems. A safer alternative might be to use rational arithmetic throughout.
The name of Luc St-Louis is misspelled as "St. Louis". Sorry, Luc!
The line
warn "Couldn't open directory $code: $!; skipping.\n";
should read
warn "Couldn't open directory $top: $!; skipping.\n";
(The same error also appears on page 24 in the first printing.)
(JPL)The line
warn "Couldn't open directory $code: $!; skipping.\n";
should read
warn "Couldn't open directory $top: $!; skipping.\n";
(The same error also appears on page 21.)
(LSL)The call to promote_if() at the top of the page has:
promote_if(
sub { $_[0] eq 'h1' },
$_[0])
but it should be:
promote_if(
sub { $_[0] eq 'h1' },
@_)
This erroneous code also appears at the top of page 327.
(JCZ)The partition() function should have a declaration my $share_2; somewhere near the top.
(SB)The discussion of the find_share() function gets the two arguments in the wrong order. For example, the mention of find_share([7,8,9,10], 41) should actually be find_share(41, [7,8,9,10]). Similarly, the key generation function sub {join "-", @{$_[0]}, $_[1]} should be sub {join "-", @{$_[1]}, $_[0]}.
(RJBS)The discussion of the find_share() function gets the two arguments in the wrong order. Although some of these were corrected in the second printing, one was not. Three lines before the section break, find_share([1..20], 210) should actually be find_share(210, [1..20]).
(DFC)I said that the sort will not call chronologically on the same pair of dates; this is only true if there are no duplicate items in the input list.
(WL)In the END block, the table header is written to STDERR, but the table itself is written to STDOUT. They should both be written to the same place, whatever that is.
"the next time next is called" should read "the next time NEXTVAL is called". "The next operation is written in Perl" should read "The NEXTVAL operation is written in Perl".
The lines:
if (-d $file) {
opendir my $dh, $file or next;
don't work because the next is not inside a loop. They should be replaced with:
if (-d $file && opendir my $dh, $file) {
(WL)
The next-to-last paragraph says that items are removed from @items and placed onto the end of @perms. Actually the code has unshift, so they're placed at the beginning of @perms, not the end.
(VL)In increment_odometer(), the line
until ($odometer[$wheel] < 9 || $wheel < 0) {
should perform the tests in the other order:
until ($wheel < 0 || $odometer[$wheel] < 9) {
It is not logically correct to use $wheel as an array subscript when it might be out of range. The function works as printed, but this is something of a lucky fluke.
An analogous problem is present in increment_pattern() on page 133.
The phrase "DNA is organized as a sequence of base pairs..." should read "DNA is organized as two complementary sequences of nucleotides...". A "base pair" is one complementary pair of nucleotides.
The FlatDB library described starting on this page uses the Iterator() function defined elsewhere in the Iterator_Utils package, so it needs to import that function. The line
use Iterator_Utils qw(Iterator);
should be added just after the package FlatDB; declaration.
(ANON)There should be a chomp just after the while (<$fh>) at the very bottom of the page. Otherwise, equal queries on the rightmost field won't work properly.
(Also, similar errors on pages 144, 147 (twice) and 151; thanks John P. Linderman.)
(DL)It would be better if the split $self->{FIELDSEP} were split $self->{FIELDSEP}, $_, -1. Otherwise, if the input data contained empty trailing fields, the would be omitted from the @fields array, and later could might produce an "uninitialized value" warning. For the example database this can't happen, since the last field is numeric, and so won't be empty, but it could happen with other databases.
(DL)The code with the "punctuation that made my eyes glaze over" contains a minor error:
@F{@{$self->{fields}}} = split $self->{FIELDSEP};
fields should be in capitals here:
@F{@{$self->{FIELDS}}} = split $self->{FIELDSEP};
(RS)
The last line of code on the page,
return [$position, $_] if $is_interesting->(%F);
should probably be:
return $_ if $is_interesting->(%F);
Moreover, it should not be in boldface.
The do block should be while (1), or perhaps a do-while of some sort.
(JM)The first paragraph in section 4.5.2 refers to "listrefs". There is no such thing. It should have said "arrayrefs".
(JW)The text mentions "the test for ref($arg) eq 'ARRAY'", but the code on page 167 that is being described actually has just ref($arg). I made a late change to simplify the code, and forgot to change the following discussion to match.
In the middle of the page, the phrase "If you later ask the hash what's stored under that key" should be "If you later ask the scalar what it contains".
The code
if ($content_type eq 'text/html') {
assumes that the Content-Type field will always have a bare content type. But actually, the HTTP/1.1 standard allows the field to contain zero or more "parameters", so that the $content_type variable might contain (for example)
text/html; charset=ISO-8859-4
in which case the test above will fail even though it should have succeeded. The test here should be replaced with
if ($content_type =~ m{^text/html\b}) {
and similarly on pages 192, 193, and 196.
(AR)The sample callback arguments contain relative URLs. This is the behavior if the $base argument to get_links() is undefined. However, Grasshopper doesn't use get_links() in that way; it always passes a URL in for $base. The result is that the URLs passed to the callback are absolute URLs, interpreted relative to $base.
(GC)$html is declared twice. The inner declaration
my $html = get($url);
should be
$html = get($url);
(This error also appears on page 196 in the first printing.)
(JCZ)$html is declared twice. The inner declaration
my $html = get($url);
should be
$html = get($url);
(This error also appears on page 193 in the first and second printings.)
(AR)The tree in figure 5.6 is missing a node. The leaf labeled (4,1,1,1) should have a second descendant, labeled (2,2,1,1,1), to the right of the one labeled (3,1,1,1,1).
(LSL)"pop 48, 80 from stack" should read "pop 48, 20 from stack".
(PW)In the middle of the last paragraph, the phrase "rebinding the variables to the appropriate variables" should be "rebinding the variables to the appropriate values".
The definition of show() is suboptimal, because the last element of its output will be followed by an extraneous instance of $". This isn't normally noticeable, because the default value of $" is a space.
(MZ)The first line of the charclass() function reads my ($s, $class) = @_;, but it should be my $class = shift;.
(KH)$regex3->show(30) should have been show($regex3, 30).
(WL)In the function tai64n_to_unix_time(), the line
return [undef, $rec] unless s/^\@([a-f0-9]{24})\s+//;
should read
return [undef, $rec] unless $rec =~ s/^\@([a-f0-9]{24})\s+//;
(PW)
In the first version of fold(), at the top of the page, the line:
$fold->($f->($x, $first), @_)
should read:
$fold->($f->($x, $first))->(@_)
(GM)
In the _i_or() function, there should be a declaration
my $rv;
just after return sub.
(GC)$dbh->query($filename, $value) should be $dbh->query($fieldname, $value).
(WL)sub { $F{OWES} > 100 } should be sub { my %F = @_; $F{OWES} > 100 } as on page 143. Also, the same error occurs on pages 357 and 448.
(WL)In the brief code display in the middle of the page and in the following sentence, the pattern /-{3}\n|\+3\n/ should read qr/-{3}\n|\+{3}\n/.
(PW)The push @tokens, grep $_ ne "", $sep, $tok, $i will produce a lot of "undefined value" warnings as written; it would probably be better as push @tokens, grep defined && $_ ne "", $sep, $tok, $i. (Also similarly on page 371.)
(WL)In the middle of the page, the line
my ($plus_token, $term_value, RIGHT) = @_;
is missing the $ on RIGHT.
Also, $plus_token should be $minus_token.
(MK)The lexer, as written, doesn't correctly handle regexes that contain backaslashed metacharacters. This is because the PAREN, QUANT, and BAR lexers take precedence over the ATOM lexer, and get first crack at interpreting those characters, before the backslash-escape part of the ATOM lexer can see them. The correct lexer handles the backslashes with higher precedence, passing control to the metacharacter lexers only for unbackslashed characters:
my $lexer = iterator_to_stream(
make_lexer($input,
['ATOM', qr/\\x[0-9a-fA-F]{0,2} # hex escape
|\\\d+ # octal escape
|\\. # other \
/x, ],
['PAREN', qr/[()]/, ],
['QUANT', qr/[*+?]/, ],
['BAR', qr/[|]/, ],
['ATOM', qr/./, ] # other char
)
);
A related error occurs on page 373.
(WL)The - node at the lower-right in the diagram (connected to wires m, n, and p) should be a + node, since k = c + 273.15. The diagram on page 486 gets it right.
Similarly, the reference to the node in the middle of the page ("...causing the - node to set wire p to 310.15...") should describe it as a + node instead of as a - node.
(WM)The settor_is() function issues an inappropriate warning if it's called to check the settor of a node with no settor. The code has
sub settor_is { $_[0]{S} == $_[1] }
but it would be better as:
sub settor_is {
my $settor = $_[0]{S};
defined($settor) && $settor == $_[1];
}
The function works properly without this change, except for the warning.
(VZ)There are errors in the set() function on page 476 and the revoke() function on page 477. The value() and has_value() methods each require an argument, to inform the methods of who is asking the question. set() and revoke() don't supply this argument, which is mandatory.
In set() on page 476, the lines:
unless ($value == $self->value) {
my $v = $self->value;
should be:
unless ($value == $self->value($settor)) {
my $v = $self->value($settor);
and similarly, in revoke() on page 477, the line:
return unless $self->has_value;
should be removed entirely; if the request to revoke the value was made by the only component that is allowed to revoke it, namely the one that set the value in the first place, then has_value() will return false.
Without these changes, programs generate a lot of (inappropriate) "use of uninitialized value" warnings, and may produce incorrect results under some circumstances.
The letter labels in the program code for the local propagation network are intended to match the ones in the diagram on page 483. But the labels $i and $j are switched, so the network that is constructed by the code is wired up wrong, and the network produces wrong answers. Instead of:
{ my ($i, $j, $k, $l, $m) = Wire->make(5);
$F = new_io('Fahrenheit', $i);
$C = new_io('Celsius', $m);
new_constant(32, $j);
new_constant(5/9, $l);
new_adder($j,$k,$i);
new_multiplier($k,$l,$m);
}
one should have:
{ my ($i, $j, $k, $l, $m) = Wire->make(5);
$F = new_io('Fahrenheit', $j);
$C = new_io('Celsius', $m);
new_constant(32, $i);
...
Alternatively, just change new_adder to new_subtractor on line 6.
(VZ)The display in the top half of the page of "four mathematically equivalent forms" contains one form that isn't equivalent. The four forms are
F + (hspc, 0) = plus;
plus + (-hspc, 0) = F;
plus - F = (-hspc, 0);
plus - (hspc, 0) - F = 0;
but the third one should be
plus - F = (hspc, 0);
instead.
In the middle of the page, I said "we must use $self->component($k)->scale($coeff) rather than $self->component($k) * $coeff". The latter expression should have been $self->component($k)->value * $coeff.
(WL)The function add_subobj_declaration() should be named add_subfeature_declaration(), to match the entry in the dispatch table at the bottom of page 551.
(WL)The definition of %eval_op is missing. It should have at least
%eval_op = ('+' => 1, '-' => 1, '*' => 1, '/' => 1,
'CON' => 1, 'VAR' => 1);
An earlier version of the program performed a constant-folding optimization, and used the following dispatch table:
my %eval_op = ( '+' => sub { $_[0] + $_[1] },
'-' => sub { $_[0] - $_[1] },
'*' => sub { $_[0] * $_[1] },
'/' => sub { $_[0] / $_[1] },
'CON' => "special case",
'VAR' => "special case",
);
In the version of Linogram used in the book, it's probably best to eliminate this entirely, turning Expression::new into:
sub new {
my ($base, $op, @args) = @_;
my $class = ref $base || $base;
bless [ $op, @args ] => $class;
}
(WL)
In the definition of $name, the line > sub { ... } should read >> sub { ... }.
(WL)The second boldface line in promote_if() is missing a parenthesis; it says
if ($is_interesting->($element->{_tag}) {
but it should be
if ($is_interesting->($element->{_tag})) {
(JCZ)
The definition of the Fibonacci function here is not the one that is usually used by mathematicians. Mathematicians always put fib(0) = 0 and fib(1) = 1, so fib(2) = 1 also. But the definition I give on page 34 has fib(0) = 1 instead, so that fib(2) = 2.
This may have been deliberate, and in any case the error is small, because page_34_fib($n) = standard_fib($n+1) for all n. But it at least shows poor judgement, because the definition I did use was inconsistent with the table on page 33, which has fib(1) = fib(2) = 1 as is standard.
If one uses the standard definition, the Fibonacci function enjoys a number of mathematical properties that make its analysis more tractable. (For example, fib($a*$n) is always an exact multiple of fib($n).)
It would have been better to use the usual definition, as I did on page 243:
sub fib {
my $n = shift;
if ($n < 2) { return $n }
fib($n-2) + fib($n-1);
}
The nonstandard definition also appears on pages 66 and 69 and in the illustration on page 76.
(JCZ)There is a } missing from the last line on the page.
(JPL)The _DEFAULT_ callback function is missing its close brace.
(JCZ)In the code display in the middle of the page, the expression $table{_DEFAULT_} should be $table->{_DEFAULT_}.
(JCZ)Near the top of the page, the expression $cache{$self} is missing its close brace.
(VL)The third code display on the page has a period between the arguments to the memoize_method() call; it should be a comma.
(GC)In the fourth paragraph, the phrase "the cost-benefit ratio is nine times as large" should read "the cost-benefit ratio improves ninefold".
The loop at the top of the page:
while ($file = NEXTVAL($octopus_file)) { ... }
will terminate prematurely if the initial call to interesting_files() includes a request to examine a file named 0. To avoid this edge case, one should write:
while (defined($file = NEXTVAL($octopus_file))) { ... }
instead. Similarly, the if test just below should be if (defined(NEXTVAL(...))) rather than just if (NEXTVAL(...)).
(JPL)The variable $next_octopus in the second code display should have been $octopus_file, to be consistent with the first code display and with the example at the bottom of the previous page.
(JPL)The make_genes() function does not correctly handle the special case where the input contains an empty wildcard, symbolized by (). In such a case, there are no matching strings, and the iterator should immediately indicate exhaustion.
(JPL)In the first code display, the line
open my($fh), "|-", "tac", $file
or return;
should be
open my($fh), "-|", "tac", $file
or return;
(JCZ)
At the bottom of the page, the line
my $q = $db->callbackquery(sub {my %F=@_; $F{PAGE}=~ m{/book/$}});
should be
my $q = $db->callbackquery(sub {my %F=@_; $F{page}=~ m{/book/$}});
because the keys in the %F hash must match the names passed in the call to new on the previous line.
(JCZ)Each of the three pages has a call to imap that divides numbers by 37268. Each division should be by 32768 instead.
(IS)There is a close parenthesis missing at the end of the Iter::value() function.
(WL)print F, get($url) should be print F get($url).
(PW)In the last code display, print F, $content should be print F $content.
(PW)In the second line of code on the page, s/^\Q$top/o should be /^\Q$top/o.
(JQ)There is an extraneous space between the # and the ! in the shebang line of the example.
(GC)In the (perhaps unlikely) event that Perl's built-in sort function tries to use the partitions() comparator to compare an element with itself, the comparator will return an undefined value, which is a fatal error. For more robustness, add return 0; after the for loop.
(JPL)The phrase "rewrite the while loop as a for loop" should probably be "rewrite the until loop as a for loop".
(VL)The call to match() in the last code display should be to matches().
(JQ)In the cutsort() function, I wish that instead of this:
insert(@pending, head($s), $cmp);
$s = tail($s);
I had written this:
insert(@pending, drop($s), $cmp);
A similar kind of change is possible in display_failures() on page 433, although less obviously preferable.
The name of the function should be cut_loops, not cut_loops2. Otherwise, the recursive call inside the function won't work properly.
(MB)In the return line of promote_if_h1tag(), the quotation mark should be a pair of apostrophes ''.
(WL)In the version of alternate() at the top of the page, the lines:
if (($v, $newinput) = $p1->($input)} { return ($v, $newinput) }
if (($v, $newinput) = $p2->($input)} { return ($v, $newinput) }
should be:
if (($v, $newinput) = $p1->($input)) { return ($v, $newinput) }
if (($v, $newinput) = $p2->($input)) { return ($v, $newinput) }
my(..., $qatoms) should be my(..., $qatom).
(WL)s/^ $BULLET//o should be s/^$BULLET//o.
(WL)The code display in the middle of the page:
my %string_version = ('>'=> 'gt', '>=', => 'ge', '==' => 'eq',
'<'=> 'lt', '<=', => 'le', '!=' => 'ne');
should look like this:
my %string_version = ('>' => 'gt', '>=' => 'ge', '==' => 'eq',
'<' => 'lt', '<=' => 'le', '!=' => 'ne');
In the display midpage, with examples of hidden constraints, one of the constraints is:
top.start + wd = top.end
which does not make sense, since top.start is a point and wd is a scalar. It should have said:
top.start + (wd, 0) = top.end
Similarly, the analogous constraint at the bottom of the page should be fixed analogously, to say:
F.top.start + (F.wd, 0) = F.top.end
The final "; is missing in die "Unknown tuple component ... 'kind'";.
(WL)"Sean Burke recorded my Ivory Tower talk and cut CDs and sent them to me and who supplied RTF-related consulting..." should read "Sean Burke recorded my Ivory Tower talk, cut CDs and sent them to me, and also supplied RTF-related consulting...".
(RJBS)In the last clause of the second paragraph, the phrase "all it knows is that is should..." should read "all it knows is that it should...".
(KS)In the middle display, there is a space missing between push and @results, and there is a space missing before the colon in the final return statement.
(JK)In the second display, the closing ] is indented too far.
(JK)The last code display on page 32, and the first on page 33, use tags 'maybe', which is inconsistent with the all-capitals tags used on page 30-32. Although I think that the code will still run as given, there was no reason to change the tags; it was just an oversight.
A similar inconsistency appears on pages 326-328.
The message "Couldn't chdir to '$dir: $!; aborting" should read "Couldn't chdir to '$dir': $!; aborting".
(HDP)The } at the end of change_dir() is indented too far.
(RJBS)There is a space missing before the => in 'DEFINE'=> \&define_config_directive,.
At the top of the page, the phrase "if looks for" should be "it looks for".
(TJH)Each of the six => items in the code display at the bottom of the page should be preceded by a space.
(PW)In the last display, the next-to-last } is indented too far.
(JK)In the final paragraph, the fonts in the phrase "with arguments 128,0,64" are wrong. It should appear as "with arguments (128, 0, 64)".
In the illustration, the code for the caching stub is missing a $ sign. The second line has func->(@_), but it should have $func->(@_).
(LE)In the middle of the page, there is a space missing between "in" and "Figure 3.6".
In "join $; , @_ ", the word "join" should be in monospaced font.
In the comment in the first code display, the word computatation should be computation.
(AK)The second code display on the page has an extra space after the open parenthesis in the memoize_method() call.
"a sequence of <=>'s and ||s" should be "a sequence of <=>s and ||s".
(VL)The last sentence in the second paragraph should read "Then we would still be able to emulate the original dir_walk()...".
(PW)There is a space missing before the => in 'all'=> \@EXPORT_OK.
(PW)"But they payoff" should read "But the payoff".
(JS)The last line of code on the page should be indented one more space to the right.
(RJBS)There is an extra blank line before the closing brace of the while loop in the middle of the page.
(JPL)The parenthetical remark about Lincoln Stein's article is missing its close parenthesis.
(AL)The spacing in the first paragraph of section 4.3.2 is generally too tight, and in particular the words "of" and "Virginia" in the first sentence are too close together.
(VL)The second sentence of section 4.3.3 says "Why would we want to this?", but it should be "Why would we want to do this?".
(JCZ)In the code display in the middle of the page, the line:
my $q = $dbh->callbackquery(sub { my %F=@_; $F{STATE} eq 'NY'});
is missing a space:
my $q = $dbh->callbackquery(sub { my %F=@_; $F{STATE} eq 'NY' });
Of the ten boldface lines in callbackquery(), only the second, third and fourth (the ones with seek() and tell()) should be boldface.
(PW)In the first line of HTML log file data, there should not be a space between ~ and mjd.
(PW)There should be a paragraph break just before the sentence that begins "If $it were an iterator...".
(PW)The dashed line that leads into the "return" box on the right is missing its arrowhead.
(PW)In the last paragraph of section 4.4.4, the phrase "the next argument it tried" should read "the next argument is tried".
The sentence beginning "this won't work because..." is ungrammatical. It has the structure "... the caller will not be able to distinguish between ... from one that ...". It should read either "... the caller will not be able to distinguish between ... and one that ..." or "... the caller will not be able to distinguish ... from one that ..." as the reader prefers.
There's a extra space in the my $stop_size line that misaligns the = sign.
(GC)Both versions of each_array() are missing a space before the : on the third line.
On each page, there is an extra space in the line:
return () if $cur_elt >= $stop_size;
(JPL)
There is a space missing before the => in 'SRC'=> and 'LOWSRC'=>.
In the first code display, there should be a space between =~ and /^q/i.
In the fourth line from the bottom of the page, WWW:SimpleRobot should be WWW::SimpleRobot.
(AL2)The last line of code on the page is missing a space between the ) and the {.
There's an extra space after the % sign in n % 2 == 0.
(JPL)The reference in the first paragraph to "Figure 5.7" should be to Figure 5.5 instead.
The third sentence on the page is missing a word. It should say "...when the call returns, it moves back up to the parent."
(JCZ)There's an extra space after my $max, causing the following = sign to be misaligned.
(GC)The code display named partition-iterator-2 should be named partition-it-2.
(PW)The -- in the code display in the middle of the page is in the wrong font.
(JPL)The close brace in the display in the middle of the page is indented one space too far.
(JPL)The "A:", "B:" and "C:" labels on the displays should be in fixed-width font.
Near the bottom of the page, "create a new call frame and active it" should be "create a new call frame and activate it".
In footnote 5, "O'Reilly and associates" should read "O'Reilly and Associates".
(JS)The last line of the code on the page, $i++;, is indented one space too far.
In the middle of the page,
node($m, upfrom_list($m+1) );
should be
node($m, upfrom_list($m+1));
The typography in the expression 24 · 320 · 5 is all wrong; it should be 24 · 320 · 5.
(GB)The spaces following the commas in "278, 942, 752, 080" should be omitted.
In the code display, the last line, which is output of the program, should be in boldface.
In the last line of the page, "It presently generates..." should be "At present, it generates...".
In the middle of the page, the sentence "Depending on the outcome of the comparison, it now know, a new element..." is garbled. It should read "Depending on the outcome of the comparison, the function now knows a new element..."
(PW)The last paragraph says that "The next function takes a filename, an open filehandle, and...", but it should say "The next function takes an open filehandle, a filename, and...".
(PW)In the digest_maillog() function, there should be a space between =~ and the following /.../ in each of the five constructions that reads $rec =~/.../.
(PW)At the end of the last paragraph, "synatax" should be "syntax".
(GC)In the very middle of the page, in the phrase "and the total is ..., or ... .", there is a superfluous close parenthesis just before the comma.
(GC)In the inline equation in the middle of the page, the variables P and pmt should be in italics.
There should be a blank line between the two function definitions in the first display.
The 'keeper' and 'maybe' tags are lowercase, which is inconsistent with the usage established on pages 30-32. See the correction for pages 32-33 for more information.
In the first code display, the longest line should end with )) }); instead of with ))}); .
In the comment at the top of the page, "appropriate" is misspelled.
(DT)On the second line from the bottom of the page, in "List::Util::reduce", the word "reduce" should be in monospaced font.
(DT)The use overload directive should have a space before each of the four instances of =>.
Near the bottom of the page, "does and with a newline" should be "does end with a newline".
(RS)The second paragraph should end "...with the features currently in Perl."
In the code display at the top of the page, there should be a space between the =~ and the /\G.../ in each of the eight =~/\G.../ constructions.
(PW)In the paragraph numbered "3", the sentence "This occurs when $i the most recent input..." should read "This occurs when $i, the most recent input...".
(PW)At the bottom of the page, the phrase "one if its productions" should be "one of its productions".
(TJH)The final }; on the page should be moved one space to the right.
(PW)The -> in the doorbell grammar should have been a right arrow symbol (→).
The first complete sentence on the page has a dangling pronoun. It says "But it will be less efficient than the previous version, because it will call alternate() and concatenate() each time it is called...". The word it here refers to the parser constructed by star(), not to star() itself, and so should read "But this will be less efficient than the previous version, because the constructed parser will call...".
In the code display at the bottom of the page, the apostrophes should be neutral single quotes.
Near the bottom of the page, the apostrophes in 'O'Reilly' should be neutral single quotes.
The three -> symbols in the contrived example should be right arrow symbols (→).
Near the top of the page, use overload '""'=> is missing a space; it should be use overload '""' =>.
Most of the code on these pages should be tagged as "Code library", downloadable from http://hop.perl.plover.com/Examples/Local_Propagation.pm. The example on page 485 should be tagged as downloadable from http://hop.perl.plover.com/Examples/local-propagation.
In the last paragraph on the page, there is an extra comma after the phrase "The values 14, 9, and 3.5".
In the first line on the page, the semicolon should be a colon.
Near the bottom of the page, the phrase "one if its variables" should read "one of its variables".
In the reciprocal() function, the line
my ($self, $coeff) = @_;
should be
my $self = shift;
(BT)
The two displays on each page should be aligned.
The two instances of $_[0]{O}{$basename} would be better written as $self->{O}{$basename}, both for consistency and to avoid confusion between the 0 and the O.
(WL)The definition of $definition has
$definition = labeledblock($defheader, $Declaration) ...
This will work, as long as $defheader is already properly defined, which it is. But for consistency, we should probably write this instead:
$definition = labeledblock($Defheader, $Declaration) ...
(PW)
In the middle of the page, the phrase "$extends is $line" should be "$extends is line".
(TJH)In the second paragraph, "Two others are..." should be "The two others are...".
(PW)The phrases (expression representing constant 3) and (expression representing variable 'boxwid') should be in a slanted monospace font.
NAME => 'TOP' should read NAME => 'top'.
The two lines that read
age = 4;
should read
constraints { age = 4; }
instead.
In the last paragraph, "named" should be "names".
The line under "Unix" that mentions "epoch time format" should be indented.
The function index entry for alternate2 is improperly run in to the preceding entry.
Note that this version of read_config() doesn't support the INCLUDE directive as defined in the previous section, because order of the arguments in the $action call is inconsistent with the order of the parameters in the read_config() function. A similar problem occurs with the version on page 50.
If you want to fix this, one way is to reorder the parameters; another is to have INCLUDE call a helper function that calls read_config() in turn with the arguments in the correct order.
(TH)The code
for my $abbrev (keys %n_expand) {
$pat =~ s/$abbrev/($n_expand{$abbrev})/g;
}
would have been simpler as
while (my ($abbrev, $expand) = each %n_expand) {
$pat =~ s/$abbrev/($expand)/g;
}
(GC)
The title of section 4.6.1 is "Using foreach..." but then the next paragraphs discuss for. In Perl, for and foreach are identical, as I mention on page 451. Because they're interchangeable, I tend to interchange them without meaning to, sometimes with confusing results.
The version of each_array() on page 180 uses ref $arrays[0] to test the first argument; if it is a non-reference, it is taken to be the label of a stop-type function. In the version on page 181, this test has changed to UNIVERSAL::isa($arrays[0], 'ARRAY'). That's because the page 181 version is expecting that the first argument might be a code reference, so the simpler ref test will no longer work.
(GC)The first line in the powerset_recurse function reads
my ( $set, $powerset, $keys, $values, $n, $i ) = @_;
but it should read
my ( $set, $powerset, $keys, $values, $nmembers, $i ) = @_;
This wasn't originally my mistake; I took the code as it was written in Mastering Algorithms with Perl.
(LSL)The boxes labeled MERGE should probably say UNION instead, since what's being used here is actually the union() function of p.274, and the behavior is different from that of the merge() function of p.271 that was mentioned in the analogous diagram on p.272.
(JPL)It may appear that list_to_stream() is broken, because, for example:
my $list = list_to_stream( 1 .. 10 );
1 while defined drop($list);
fails; under strict 'refs' it says Can't use string ("10") as an ARRAY ref. But no, the function is working as designed and as documented on pages 291--292. The final argument of list_to_stream() is required to be the "final tail" of the stream that is constructed, and must be "another (possibly empty) stream or a promise"; in this example it is neither. The correct call would be:
my $list = list_to_stream( 1 .. 10, undef );
where the final undef argument is an empty stream, as in the example on page 292.
(O)The line
tail(iterate_function(sub { _next_record($fh, $filename, $devino) }));
is designed to work with the iterate_function() function that is defined on page 263; this version returns a stream. There is another, different iterate_function() function on page 134, that returns a chapter-4-style iterator object; that won't work here. I should have given the two functions different names, but sometimes these things slip through the editing process.
(HDP)Using a fixed constant like 1e-12 in close_enough() is a bad idea; one should calculate error relative to the size of the arguments. I didn't mean to suggest that one should use this exact code; it was intended only as an example. A similar consideration holds for the value of $e on page 305.
(WL)See page 303.
(WL)Regarding the part of the lexer that handles hex escapes, which has
\\x[0-9a-fA-F]{0,2}
Per Westerlund asks "I wonder if the intention was to allow hex escapes with 0, 1, or 2 following hex digits? What does \x mean in this context?"
That's a good question! It is intentional; I carefully checked the behavior of the regex engine while I was writing this section. In the construction \x0a, the leading zeroes are optional, and in fact they're so optional that you can write \x to mean \x00. I probably wouldn't want to use this feature in a real program, but in this case we might as well do what the real regex engine does.
(PW)In add_constraints(), it might look as though this:
push @{$self->{C}},
$value->intrinsic->constraints,
$value->synthetic->constraints;
should be this:
push @{$self->{C}},
$value->intrinsic_constraints,
$value->synthetic_constraints;
but it's not so. The intrinsic_constraints() method is called on a Type object to calculate its basic set of intrinsic constraints from scratch, but the $value here is not a Type object but a Value::Feature object. intrinsic() is an accessor that returns the intrinsic constraint object already calculated for this expression, and constraints() extracts the list of constraints from this object. Similarly for the synthetic constraints.
(PW)
Return to: Universe of Discourse main page | What's new page | Perl Paraphernalia | Higher-Order Perl